Remove the Coax Connector Professionally

February 24, 2022 1 min read

COAXIAL CABLE: WHAT ARE THEY USED FOR?

Coaxial cable is a type of copper cable specially built with a metal shield and other components engineered to block signal interference. It is primarily used by cable TV companies to connect their satellite antenna facilities to customer homes and businesses.

This type of cable connector is usually essential for transmitting radio frequency signals. If your existing connector has gone faulty or you want to replace your connector with another one, you’ll have to remove the existing one, thus requiring this process.

How can you do it? We’ll share it in this article how to remove the coax connector professionally:

  1. Disconnect the coaxial cable from the gadget it is attached.
  2. You’ll find a connector nut (metallic) at the termination point of the wire.
  3. Rotate this nut to remove the connector from the cable. You might not be able to do it as such. So you can use pliers for this purpose.
  4. Now your coaxial cable will be loose. Take it out from the connector keeping the direction of the hand straight. Any bending at this stage might damage the wire, and you wouldn’t want that.
  5. Once you have the wire, keep it straight in front of you. Put the wire cutters at an angle of 90-degree; snap the wires from just behind the connector. The connection between the coaxial cable and your connector has been removed.

SUMMING UP:

The process of disconnecting the coaxial cable from theconnector is straightforward. Just follow the procedure above and you can do it in minutes.


Catalog

View All
  • SolderStick Waterproof Solder Wire Connector Kit - SolderStick
    Secured and Waterproof Wiring Connections in Literally Seconds! SolderStick eliminates the hassle and allows you to focus on rewiring done the right way.
  • 300pcs SolderStick Ring/Eyelets Connector Set - solderstick
    Thick copper barrel ensures strong secure crimping every time, providing minimal voltage drop, high current flow, and less heat. These will prevent short circuits and problematic wiring that inferior connectors are known for. Insulation tubing has unique dual-walled design. High quality 3:1 shrinkage tubing has a heat-activated sealant lining to provide a 360-degree secure seal. It's flame-retardant, waterproof, and can be used underground Package includes: Total 300 PCS Heat Shrink Ring Connectors. Wire range: 22-18 ( red ) / 16-14 ( blue ) / 12-10 ( yellow ) A.W.G.  Copper barrel is an excellent conductor of electricity, corrosion resistant and has a very high melting point. These salient features will generate minimal heat while maintaining a high current flow with minimal voltage drop. COMPLIANT WITH ALL ELECTRICAL STANDARDS – SolderStick heat shrink connectors are compliant with ROHS, ISO 9001:2008, SGS and CE standards. Total: 300pcs100pcs Red(M5#10: 25pcs, M6 1/4”: 25pcs, M8 5/16”: 25pcs, M10 3/8”: 25pcs)100pcs Blue((M5#10: 25pcs M6 1/4”: 25pcs, M8 5/16”: 25pcs,M10 3/8”: 25pcs)100pcs Yellow ((M5#10: 25pcs, M6 1/4”: 25pcs, M8 5/16”: 25pcs, M10 3/8”: 25pcs) Specifications 100 RedWire range: 0.5~1.5mm², A.W.G.:22~18, Maximum current = 19A100 BlueWire range: 1.5~2.5mm², A.W.G.:16~14, Maximum current = 27A100 YellowWire range: 4~6mm², A.W.G.:12~10, Maximum current = 48A  
  • 400pcs Spade Connectors Kit - solderstick
    Thick brass in the wire connectors ensures strong secure crimping every time, providing small voltage drop, high current flow, and less heat. These will prevent short circuits and problematic wiring that inferior knockoff connectors are known for. How To Use        
  • T-Tap Wire Connectors - solderstick
    Tap into any wire with ease using our T-Type Quickconnection terminals! T-Tap Connectors are used to tap into an existing wire. Closing the quick slide connector makes a connection to the wire that can be accessed using a push-on terminal. T-Tap Wire Terminals allow you to tap an existing wire with another wire with ONE crimp and no additional connections. No wire stripping is necessary. Simply clip part over the primary wire and close with a pair of pliers No special tools are required  Taps are insulated, color coded by wire size All taps meet or exceed UL and SA standards   HOW TO USE: Simply insert both wires into the splice, squeeze down on the metal insert with pliers, and close the cap. SPECIFICATIONS: Quantity: 120 PCS Material: Nylon, Copper, Tin Maximum Operating Temperature: 221 °F Maximum Recommended Voltage Rating: 600 V Box Size: 20cm x 15cm x 5cm Package Weight: 0.35 kg PACKAGE INCLUDES: 20 x Red Connectors 20 x Blue Connectors 20 x Yellow Connectors 20 x Red T-Tap Wire Terminals 20 x Blue T-Tap Wire Terminals 20 x Yellow T-Tap Wire Terminals  
  • 164pcs Color-Coded Heat Shrink Tubing - solderstick
    ✔️ EASY AND FAST PROCESS All-in-one step solder and seal process. Shrink quickly, durable and evenly with our 2:1 shrink ratio polyolefin tubing to create a tight bond with connecting wires. ✔️ STAY ORGANIZED Our connectors come within a storage box, easy to store and carry. You can throw the heat shrink tubing kit in your toolbox and not have to worry about size getting mixed together. ✔️ ENVIRONMENTAL FRIENDLY AND SAFE Made of polyolefin, soft and flexible, acid and alkali resistance, anti-aging. This ensures that wires are tightly connected and prevents wires slipping out of the terminal. ✔️ WIDE APPLICATIONS Provide a barrier between cables and corrosive chemicals, insulate cables and wires against extreme heat in aircraft, boats, and military-grade vehicles. Suitable for electrical insulation, strain relief, cable bonding, color-coding, and identification. Specification: 60pcs 1.0 x 40mm Heat Shrink Tubing Set 30pcs 2.0 x 40mm Heat Shrink Tubing Set 20pcs 3.0 x 40mm Heat Shrink Tubing Set 16pcs 4.0 x 40mm Heat Shrink Tubing Set 12pcs 6.0 x 40mm Heat Shrink Tubing Set 10pcs 8.0 x 80mm Heat Shrink Tubing Set 8pcs 10.0 x 80mm Heat Shrink Tubing Set 8pcs 14.0 x 80mm Heat Shrink Tubing Set