How to Remove the Wire from the Wago Connector?

December 27, 2021 1 min read

Whether it is the fine stranded or splicing standard connection, you can rely on the wago connectors. These connectors are easy to use, and most importantly, they are reusable. In case you have placed the wrong wire or want to disconnect the existing connection while forming a new one, you can easily do so with the same wago connector.

What is a Wago connector?

These connectors are specifically available for making electrical splicing easier. In establishing such connections, you would not need any tools. Besides, the time required for the installation & removal of wire and the maintenance efforts are reduced to minimal by using the wago connector. Thus, these connectors can help you in the best possible way.

Process of removing wire from the Wago connector:

Here’s the process for removing the wire from the wago connector.

  1. Hold your wago connector with the thumb and pointer finger in one hand.
  2. Place the other hand close to the wire coming out of the wago connector.
  3. Start pulling the wire while twisting it a bit. You’ll have to apply a bit of force to get it out of the connector.
  4. Within a few seconds, you’ll see the wire out without any harm to the wire or connector. So, you can reuse it as you want.