30-day money-back guarantee30-day guarantee
The whole
wire repair
in one box
Find the break, join it, seal it. The fault finder, the connectors and the heat gun in one kit.
- 1100 SolderSticksolder seal connectors
- 2TrueTrace™fault finder + wand
- 3392°F heat gunflows and seals
Find it. Join it. Seal it.
TrueTrace™ Fault Finder
Clip on and sweep the wand along the harness. The tone holds while the wire is good and stops at the break. No pulling panels.
100 SolderStick Connectors
Push both wire ends in under the solder ring. A real solder ring inside a heat-shrink tube, no iron needed.
392°F Heat Gun
Fixed, controlled 392°F (200°C). Flows the solder and shrinks the tube flat in 10–15 seconds.
Your Black Friday price
Before you order
When does the Black Friday price end?
Black Friday pricing ends Monday 30 November at 11:59 PM Pacific, or sooner if the 2,000 kits sell out.
Which AWG sizes are in the kit, and how many of each?
100 connectors in four colour-coded sizes:
26–24 AWG · 0.25–0.34 mm²
22–18 AWG · 0.5–1 mm²
16–14 AWG · 1.5–2.5 mm²
12–10 AWG · 4–5 mm²
Match the colour to your wire gauge. Covers everything from thin sensor wire up to 10 AWG.
What if it doesn't work for my vehicle?
You're covered by our 30-day money-back guarantee.
Can TrueTrace find a break behind a metal panel?
No. It reads through insulation, loom and plastic trim, not through metal. Sweep wherever the harness runs behind plastic or in the open.
How fast does it ship?
Usually 3–5 business days in the US and 7–10 business days worldwide.
