4.6 Stars | 5000+ Reviews
8 tools in one 8-inch plier
Self-adjusting, 10–24 AWG
Built-in live-wire indicator
In stock - Ships On Tuesday, September 22
Free Worldwide Shipping
30 Day Money Back Guarantee
24/7 Customer Support
8-in-1
Stripper Only
No. The jaws are self-adjusting – they find the right bite on anything from 10 to 24 AWG, solid or stranded, without you setting a dial or picking a notch. Squeeze once and the insulation comes away clean.
That is the whole reason to use a self-adjusting stripper. The jaws clamp the insulation and pull it clear rather than cutting to a fixed depth, so the strands stay intact and the joint keeps its full current-carrying capacity. A nicked wire is a wire that breaks later, usually somewhere you cannot reach.
Stripping, cutting, crimping insulated terminals, crimping non-insulated terminals, a ferrule anvil, a screw shear, a looping jaw for wrapping wire around a screw terminal, and a non-contact live-wire indicator. One tool instead of the six or seven you would otherwise be carrying.
Bring the nose of the tool near the conductor. If it senses voltage you get an LED and an audible alert – no contact needed, and the battery is already installed. Treat it as a warning device, not a permission slip: kill the breaker and verify before you touch a conductor.
Yes. There are separate stations for insulated terminals, non-insulated terminals and a ferrule anvil, so stranded wire going into a lever block or a terminal strip gets a proper square crimp instead of a flattened one.
Eight inches end to end, with heat-treated steel jaws. Enough length for real leverage, small enough to live in a pouch or a glovebox rather than a toolbox.
It shears machine screws from 10-32 down to 2-56, and cuts copper and aluminium conductor up to 8 AWG. It is not a bolt cutter – it is there so you can trim a mounting screw to length without walking back to the bench.
For most wiring work, no. Bought separately, the stripper, cutter, two crimpers, ferrule tool, screw shear and voltage tester come to roughly $150. This does all of it, in one hand, for a fraction of that.
3–5 business days in the USA, and 7–10 business days everywhere else.
If you are not completely satisfied, we will make it right. Every SolderStick product is covered by a 30-day money-back guarantee, and our support team is there if you need them.
